Misc Pump Information

 

Parts

LMIIPK Inline pressure gauge for windmill systems This device is placed inline with the air hose to the diffuser to measure performance and check the output of the pump and diffuser. Price $49.95.   WMD09 WIND MILL LOOP DIFFUSER LMI air diffuser loop system to increase your aeration efficiency. Attached to the diffuse unit is a built in foot valve, the unit effectively diffuses the air at the bottom of the pond. The air diffusion system can increase oxygen transfer rates by more than 3 times the normal rate by breaking the air down into smaller bubbles. It’s the only true way to harness and utilize the full power of the LMI Dual high output compressor. With low maintenance and high performance it forms a critical component of the aeration process. 75' loop Price $244.98.   WMFC LMI WINDMILL FREEZE CONTROL By continuing to aerate your pond during the winter months you will ensure that your pond doesn’t freeze over. Superior freeze control is a self-regulating system that protects against line freeze and blockage by monitoring line pressure at all times. When ice is detected in the line, the spring loaded valve at the bottom of the freeze control tank opens releasing a small amount of ethanol alcohol into the line, as needed allowing the line to clear. Once the line clears the pressure is released causing the valve to close again and operation resumes. Our freeze control can also be used to locate leaks in the air line. If the air pressure drops below the normal operating range, the check valve at the end of the air line closes preventing any aeration process to continue. Making note of the initial pressure gauge reading when you first begin the aeration process will help you quickly and easily check up on the operating effectiveness of your Windmill. Maintaining and using a Freeze Control system is made easy. Simply fill up the white tank with a few gallons of any alcohol based product, PREFERABLY ETHANOL ALCOHOL and attach the container at the 4 ft level of one of the tower’s legs so you can still monitor the gauge and fill the alcohol tank. Price $99.95.   LMIWMDRK Windmill Diaphragm Repair Kit This kit includes, 2 rubber diaphragms, 8 check valves and a new intake air filter and can be used with the single or double diaphragm unit for maintenance. Price $59.95.     SIGN18-24 Sign - 18" x 24" Danger-Thin Ice Sign Many localities require a warning sign to accompany a Dock Bubbler™ System. This 16 guage aluminum sign measures 18" x 24" and reads "Danger-Thin Ice" on both sides. Price $49.95.

Tubing

LMIAH38 .375 I.D. x .50 O.D. Clear vinyl tubing weighted per Foot .375” I.D. x .50” O.D. Clear vinyl tubing weighted, direct burial submersible tubing for connection from compressor to diffuser stations. Tubing is flexible tubing has a temperate range of -400 F to 1360 F for use with LMI’s standard barbs. This tubing remains flexible in cold temperatures. Weight is 0.11 lbs per ft. (0.050 kgs) Price $2.25.   1101149-100 .250 ID Clear PVC Tubing per 100' Roll 1/4" ID -- 3/8" OD -- 1/16" Wall • Listed by the National Sanitation Foundation (NSF 51) • Made from non-toxic ingredients conforming to FDA, 3A, and USDA standards • Does not impart a taste or odor • Glass-like clarity with mirror-smooth surface provides outstanding flow characteristics • PVC compound meets USP Class VI requirements • Lightweight yet tough and abrasive resistant • As flexible as rubber • May be autoclaved at 20 lbs. steam pressure for 15 minutes • Generally unaffected by most oxidizing and reducing agents • Handles a wide variety of chemicals, gases, and liquids • It is easily drained and flushed clean with most available cleaning and sanitizing agents • Diluted acids and alkalis have little effect, but if highly concentrated tend to make the tubing less pliable • If chemical resistance is a major concern, in-plant tests are suggested • Applicable for clean applications, smooth surface prevents lodging of bacteria and sediment buildup Price $28.90.   1101149-200 .250 ID Clear PVC Tubing per 200' Roll 1/4" ID -- 3/8" OD -- 1/16" Wall • Listed by the National Sanitation Foundation (NSF 51) • Made from non-toxic ingredients conforming to FDA, 3A, and USDA standards • Does not impart a taste or odor • Glass-like clarity with mirror-smooth surface provides outstanding flow characteristics • PVC compound meets USP Class VI requirements • Lightweight yet tough and abrasive resistant • As flexible as rubber • May be autoclaved at 20 lbs. steam pressure for 15 minutes • Generally unaffected by most oxidizing and reducing agents • Handles a wide variety of chemicals, gases, and liquids • It is easily drained and flushed clean with most available cleaning and sanitizing agents • Diluted acids and alkalis have little effect, but if highly concentrated tend to make the tubing less pliable • If chemical resistance is a major concern, in-plant tests are suggested • Applicable for clean applications, smooth surface prevents lodging of bacteria and sediment buildup Price $57.80.   1101149-500 .250 ID Clear PVC Tubing per 500' Roll 1/4" ID -- 3/8" OD -- 1/16" Wall • Listed by the National Sanitation Foundation (NSF 51) • Made from non-toxic ingredients conforming to FDA, 3A, and USDA standards • Does not impart a taste or odor • Glass-like clarity with mirror-smooth surface provides outstanding flow characteristics • PVC compound meets USP Class VI requirements • Lightweight yet tough and abrasive resistant • As flexible as rubber • May be autoclaved at 20 lbs. steam pressure for 15 minutes • Generally unaffected by most oxidizing and reducing agents • Handles a wide variety of chemicals, gases, and liquids • It is easily drained and flushed clean with most available cleaning and sanitizing agents • Diluted acids and alkalis have little effect, but if highly concentrated tend to make the tubing less pliable • If chemical resistance is a major concern, in-plant tests are suggested • Applicable for clean applications, smooth surface prevents lodging of bacteria and sediment buildup Price $144.50.

Additional units available for deeper and larger ponds
Pumps
Windmills

CALL 1-800-909-4564 TO ORDER !
 

© 2005